Filter
Top Products
12
4. Insert the tabs on the supplied
mounting bracket into the slots on
the base’s bottom, then press the
bracket down until it snaps into
place.
5. Press the AC cord into the top and
bottom grooves on the left side of
the bracket. Press the modular cord
into the top and bottom grooves on
the right side of the bracket, then
plug the modular cord into a modu-
lar phone jack.
6. Line up the keyhole slots on the
bracket with the screws on the wall,
then slide the base down onto the
screws until it is secure.
7. Press up on the handset holder to
remove it, turn it over so its tabbed
edge faces up, then press it back
down into its slot on the base.
8. Plug the TAD-1010’s AC cord into
a standard AC outlet.
9. For the best reception, adjust the
base’s antenna so it stands straight
up.
Note: If you want to remove the sup-
plied bracket after attaching it, simply
press in the tab on each side of the
bracket and lift the bracket away from
the base.
900MHz DIGITAL TELEPHONE • ANSWERING SYSTE
MEMO
ANNC.
MEMORY
MAIL BOX
MULTI-USER
DIGITAL ANSWERING SYSTEM
TAD-101
0
MULTI-USER
DI GIT AL A NSWE RING SYST EM
TONEPULSE
43-771.fm Page 12 Friday, August 13, 1999 2:59 PM