Filter
Top Products
19
Menu Options:
•
Edit
Memory
nn
— edit the
record as described in Steps 5
through 8 of “Storing a Name and
Number in Memory” on Page 17.
•
Delete
Memory
nn
— the display
prompts you to confirm the deletion.
Move the cursor to
Yes
, then press
SELECT
or
DEL/CH
. The phone
beeps, and
Memory
nn Deleted
appears.
•
Go
Back
— returns you to the list of
memory numbers.
Entering a Pause
In some telephone systems, you must
dial an access code (
9
, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect.
To enter a 2-second pause, press
REDI-
AL/PAUSE
(
REDIAL
on the base).
P
ap-
pears on the display when you enter a
pause in the memory. You can add
more pause entries for a longer pause.
Reviewing Memory Numbers
(Handset Only)
To review your memory numbers, press
MEM
. The list of memory location num-
bers (
01
-
20
) and the name stored with
each number (or
<Memory
nn>
if you
did not store a name) appears. To view
several a memory location, press its
number (
01
-
20
) or repeatedly press
8
88
8
or
9
99
9
.
To see the stored phone numbers, press
7
77
7
. An arrow to the right of the number
means it is longer than 14 digits. Press
7
77
7
again to see the rest of the number.
Repeatedly press
6
66
6
to return to the
name display.
To exit the memory number list, press
MEM
.
To see a stored name and phone num-
ber at the same time, press
SELECT
when the cursor is by a memory location
number. To exit this display, hold down
DEL/CH
until the display clears.
Dialing a Memory Number
To dial a number stored in handset's
memory, lift the handset and press
MEM
.
The list of memory location numbers ap-
pears. Choose a memory location (
01
-
20
) by pressing a number or by repeat-
edly pressing
8
88
8
or
9
99
9
, then press
TALK
.
You can also dial a memory number af-
ter pressing
TALK
. Press
MEM
(the dis-
play does not change but the phone is in
memory recall mode) then enter a mem-
ory location number.
To dial a number stored in the base's
memory, press
MEMORY
.
Location
No.
appears. Press a number key (
0
-
9
);
the display shows the number contained
in the selected memory location. Press
SPEAKER
to dial the number on the dis-
play.
43-1123.fm Page 19 Tuesday, September 5, 2000 11:13 AM