Radio Shack ET-1123 Cordless Telephone User Manual


 
18
7. Enter the phone number and any
tone or pause entries (see “Entering
a Pause” on Page 19).
If you make a mistake, use the
same method to correct it as
described in Step 5.
8. Press
SELECT
. The phone beeps
and
Memory
nn
Stored
(
nn
stands for the memory location
number you assigned) appears.
After 2 seconds,
Memory
Store
appears. Repeat Steps 3-8 to store
more numbers.
9. When you finish, press
MEM
.
To replace a stored number, store a new
one in its place using the same steps
above.
To store number in the base
, follow
these steps:
1. Hold down
MEMORY
until
Store
Number
appears on the base's dis-
play.
2. Enter the phone number and any
tone or pause entries (see “Entering
a Pause” on Page 19).
If you make a mistake, press
CLEAR
to exit the memory store operation.
Start again at Step 1.
3. Press
MEMORY
again.
Location
No.
appears. Enter the memory
location number (
0
-
9
) or the one-
touch dial button (
M1
-
M4
) where you
want to store the number. A tone
sounds and
Memory
n
Stored
or
Memory
Mn
Stored
appears on
the display to indicate that the num-
ber is stored.
To clear a stored number, simply store a
new number in its place. Or, hold down
MEMORY
until
Store
Number
ap-
pears. Then press
MEMORY
and the
memory location number (
0
-
9
) or the
one-touch dial button (
M1
-
M4
) you want
to clear. A tone sounds and
Memory
n
Stored
or
Memory
Mn
stored appears
on the display.
Use the supplied memory directory
sticker to record your stored numbers.
Peel the backing from the sticker and at-
tach it to the base.
Editing or Deleting a Number in
the Handset's Memory
Follow these steps to edit or delete a
memory number.
1. Lift the handset.
2. Hold down
MEM
until
Memory
Store
and a list of memory loca-
tion numbers appear on the display.
3. Choose a memory location (
01
-
20
)
by pressing a number or by repeat-
edly pressing
8
88
8
or
9
99
9
.
4. Press
SELECT
. A menu appears
with the three options listed below.
Press
8
88
8
or
9
99
9
to highlight the
desired option then press
SELECT
to
choose it.
43-1123.fm Page 18 Tuesday, September 5, 2000 11:13 AM