Filter
Top Products
16
To transfer a call from the base to the
handset, press
INTERCOM
. The call is
placed on hold, CHARGE/IN USE
blinks, and
Hold
and
Paging
Hand-
set
appear on the base's display.
When the person with the handset an-
swers, press
SPEAKER
. The call is re-
leased from hold and transferred to the
handset and the display changes to
Handset in Use
. To bring the base
back into the conversation for a three-
way conference, press
SPEAKER
again.
OUT OF RANGE
If you have the handset out of the base's
range while a call is in progress, noise
increases. Return to the base’s range
within 30 seconds, then you can resume
your phone conversation.
If you keep the handset out of the base’s
range for 30 seconds or more, the call is
disconnected. However if you are in 3-
way conference call, the speakerphone
call remains connected.
USING A HEADSET
You can talk with handsfree conve-
nience using an optional headset that
has a
3
/
32
-inch (2.5-mm) plug. Your local
RadioShack store has a variety of suit-
able headsets to chose from.
To connect the headset, open the rub-
ber cover marked on the side of the
handset, then insert the headset's plug
into the jack.
Notes:
• Connecting a headset disconnects
the handset's earpiece and micro-
phone.
•
8
88
8
or
9
99
9
on the handset also con-
trols the connected headset's vol-
ume, but maximum setting is not
available on the headset.
• If you place the handset on the base
to recharge it while the headset is
connected, be sure the handset
seats properly.
With a headset connected, you can
make or answer calls as usual using the
keys on the handset. You can also make
or answer calls by pressing the
SPEAK-
ER
button located on the base.
You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for great-
er convenience.
When you finish using the headset, dis-
connect it from the handset and close
the rubber cover to protect the jack.
Headset
Jack
43-1123.fm Page 16 Tuesday, September 5, 2000 11:13 AM