Filter
Top Products
77
Beyond the Basics
Setting a Security Code or Personal
Identication Number (PIN)
To play your messages from a remote location, you will need to
enter a two-digit security code or Personal Identication Number
(PIN). The default security code is 80.
From the Base
1. Press MENU/SELECT.
2. Select the SYSTEM SETUP menu.
3. Select the ANSWER MACHINE menu, and then the
SECURITY CODE submenu.
4. Enter a two-digit security code (01-99) using the number
keypad (0 - 9).
5. Press
MENU/SELECT. You will hear a conrmation tone.
From the Handset
1. Press the MENU soft key.
2. Select the ANSW. SETUP menu, and then the SECURITY
CODE submenu.
3. Enter a two-digit security code (01-99) using the number
keypad (0 - 9).
4. Press the
OK soft key. You will hear a conrmation tone.
Using the Answering Machine
Turning Your Answering Machine On and Off
From the Base
Turning On
1. With the phone in standby, press
ANSWER.
2. The answering machine announces “Answering System is
on” and plays the current greeting message.
3. MESSAGE appears on the base display. If the counter
ashes, then you have new messages waiting.
UP01799ZZ_1.indb 77 4/12/2006 12:43:53 PM