Radio Shack 43-5862 Cordless Telephone User Manual


 
The Basics
20
Install the Optional Power Backup Battery
in the Base
The battery backup allows you to
make and receive calls during a power
failure. You can use any handset or the
base, just as you would normally.
Push the battery tray on the right
side of the base until it clicks.
The lock for the battery tray is
released, and the battery tray
comes out halfway.
Pull out the battery tray at all the
way.
Place the battery pack in the
battery tray facing the label of the
battery pack downwards so that
connectors on the battery and on
the tray are aligned.
Push the battery tray back in until
it locks up. If it doesn’t lock, pull
out the battery tray once more,
and retry to push in.
You can order an optional battery pack for power backup (3.6-
volt, 900 mAh) through your local RadioShack store.
NOTES
appears in the base display as a warning that
the backup battery pack is NOT installed in the
base unit.
To use the backup battery Feature you need to
connect the AC adapter to the base, and charge
the base battery for at least 24 hours.
1.
2.
3.
4.
5.
UP01799ZZ_1.indb 20 4/12/2006 12:43:32 PM