Radio Shack 43-5862 Cordless Telephone User Manual


 
91
Beyond the Basics
2. Move the cursor to select BASE UNAVAILABLE and then
press the OK soft key.
3. Move the cursor to select YES, and then press the
OK soft
key.
4. ARE YOU SURE? appears on the display. Move the cursor to
select YES, and then press the OK soft key.
5. You will hear a conrmation tone, and the handset deletes
its own base information without contacting the base. The
handset displays the message, MODELS VARY! PLACE
HANDSET ON THE BASE FOR REGISTRATION OR REFER TO
OWNER’S MANUAL.
6. On the base you want to use, disconnect the AC adapter.
7. While holding
END/PAGE, connect the AC adapter. Keep
pressing END/PAGE until the CHARGE indicator starts to
blink.
8. Place the handset on the base and wait until the
CHARGE
indicator stops ashing.
This erases all the handset registration data on the base, not
limited to the handset you placed at Step 8 above. You need to
register other handset(s) also if you have more than one. First
de-register the handset as in Step 1 and 2 above, and then place
it on the base.
If you have trouble with de-registration, take your base and
handset (including accessory handset(s) if you have) to your
local RadioShack store or call 1-800-The Shack (843-7422) for
assistance.
Also, when you request repair or service, please be sure to bring
in the entire system (including accessory handset if used) so we
can keep your registration data intact.
UP01799ZZ_1.indb 91 4/12/2006 12:43:57 PM