Filter
Top Products
85
Beyond the Basics
4. Start to enter a remote command sequence from the chart
below within 15 seconds. After the rst command, you have
two seconds to enter the second command.
Command Function Command Function
0 then 1 Repeat a
message*
0 then 6 Answering
machine on
0 then 2 Play incoming
messages
0 then 7 Memo record
start/stop**
0 then 3 Skip a message 0 then 8 Greeting
message record
start/stop**
0 then 4 Delete a message 0 then 9 Answering
machine off
0 then 5 Stop operation 1 then 0 Help
* If you press
0 then 1 in the rst four seconds of a
message, the answering machine skips to the previous
message. If you press 0 then 1 after the rst four
seconds of a message, the answering machine repeats
the current message.
** When the rst time you enter the Memo record or
Greeting message record command, it starts the
recording. If you want to stop the recording, enter the
same command sequence again, or press 0, then 5
(Stop operation).
5. When you nish, you will hear intermittent beeps indicating
that the answering machine is in the command-waiting
mode. Enter another command from the chart within 15
seconds.
6. Hang up to exit the remote operation. The answering
machine automatically returns to its normal standby setting.
UP01799ZZ_1.indb 85 4/12/2006 12:43:56 PM