Filter
Top Products
42
Remote Operation
• set the system to answer or not answer calls
• listen to your messages
• record a new outgoing message
• record a memo
•erase messages
You cannot remotely operate the system using its
handset or another telephone on the same line.
SETTING THE SECURITY CODE
The two-digit remote operation security code
prevents unauthorized remote access to your
messages. The code is preset to 80. You can set
the code to any number from 00 to 99:
1. Press
MENU twice. The system announces
“Security code,” followed by the currently set
code. The code appears.
2. Repeatedly press or hold down
g
|
or
|
f
to
change the number.
3. Press
SET/RING to store the setting. The
system announces the newly set code.
4. Press
PLAY/STOP to exit.
To check your code at any time, press
MENU twice.
The code appears and the system announces it.
Press
PLAY/STOP to exit.
USING REMOTE COMMANDS
While in remote operation, the system stops all
answering functions and
LL
LL
rr
rr
appears. Answering
functions resume when the system is no longer in
remote operation, if you have not turned the system
off. The remote operation stops when someone
picks up the handset or any phone on the same
phone line. Ô
1. Dial your phone number and wait for the
system to answer. If the system is not set to
Ô NOTE Ô
If you wait more than 15
seconds between
keypresses, the system
sounds a long beep and
hangs up.
43-3815/3898.fm Page 42 Wednesday, May 7, 2003 10:31 AM