Qwest S1 Telephone User Manual


 
Section 1A: Setting Up Service 3
Setting Up Your Phone
1. Install the battery (if necessary).
Slide the battery release latch and then slide the battery cover
and remove it from the back of the phone.
Insert the battery into the opening, making sure the connectors
align. Gently press down to secure the battery.
Replace the battery cover and slide it until you hear a click. Then,
slide the battery release latch.
(See “Installing the Battery” on page 18 for the illustration.)
2. Press and hold to turn the phone on.
Your phone will turn on, search for wireless service, and enter
standby mode.
If your phone is locked, see “Unlocking Your Phone”on the next
page for more information.
3. Make your first call.
Use your keypad to enter a phone number.
Press .
Note
Your phone’s battery should have enough charge to turn on, find a signal,
set up your voicemail, and make a call. You should fully charge your
battery as soon as possible. See “Charging the Battery”on page 19 for
details.
Setting Up Service