Filter
Top Products
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 32
Configuration changes can performed centrally at the boot server or locally:
Central
(boot server)
Configuration file:
sip.cfg
Specify the local SIP signaling port and an array of SIP servers to
register to. For each server specify the registration period and the
signaling failure behavior.
• For more information, refer to Local <local/> on page A-6 and
Server <server/> on page A-7.
Configuration file:
phone1.cfg
For up to twelve registrations, specify a display name, a SIP address,
an optional display label, an authentication user ID and password, the
number of line keys to use, and an optional array of registration
servers. The authentication user ID and password are optional and
for security reasons can be omitted from the configuration files. The
local flash parameters will be used instead. The optional array of
servers and their associated parameters will override the servers
specified in sip.cfg if non-Null.
• For more information, refer to Registration <reg/> on page A-84.
Local Web Server
(if enabled)
Specify the local SIP signaling port and an array of SIP servers to
register to.
Navigate to http://<phoneIPAddress>/appConf.htm#se
For up to six registrations (depending on the phone model, in this
case the maximum is six even for the IP 601 and 650), specify a
display name, a SIP address, an optional display label, an
authentication user ID and password, the number of line keys to use,
and an optional array of registration servers. The authentication user
ID and password are optional and for security reasons can be omitted
from the configuration files. The local flash parameters will be used
instead. The optional array of servers will override the servers
specified in sip.cfg in non-Null. This will also override the servers on
the appConf.htm web page.
Navigate to http://<phoneIPAddress>/reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.