Filter
Top Products
Configuration Files
A - 57
This attribute also includes:
• Shared Calls <shared/>
• Hold, Local Reminder <hold/><localReminder/>
Shared Calls <shared/>
This configuration attribute is defined as follows:
call.stickyAutoLineSeize.onHook
Dialing
Null, 0, 1 Null If
call.stickyAutoLineSeize
is set to 1, this
parameter has no effect. The regular
stickyAutoLineSeize behavior is followed.
If
call.stickyAutoLineSeize
is set to 0 or Null
and this parameter is set to 1, this overrides the
stickyAutoLineSeize behavior for hot dial only.
(Any new call scenario seizes the next available
line.)
If
call.stickyAutoLineSeize
is set to 0 or Null
and this parameter is set to 0 or Null, there is no
difference between hot dial and new call
scenarios.
Note: A hot dial occurs on the line which is
currently in the call appearance. Any new call
scenario seizes the next available line.
call.transfer.blindPreferred 0,1 Null If set to 1, the Blind soft key appears as a
transfer type.
If set to 0 or Null, the Normal soft key appears.
Note: This parameter is supported on the
SoundPoint IP 330/320 only.
Attribute
Permitted
Values Default Interpretation
Attribute
Permitted
Values
Default Interpretation
call.shared.disableDivert 0, 1 1 If set to 1, disable diversion feature for shared
lines.
Note: This feature is disabled on most call
servers.
call.shared.seizeFailReorder 0, 1 1 If set to 1, play re-order tone locally on shared
line seize failure.