Filter
Top Products
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 82
USB Port <usb/>
This attribute’s settings control the USB port.
This configuration attribute is defined as follows:
This attribute also includes:
• Bulk Drive <bulkDrive/>
Bulk Drive <bulkDrive/>
These settings control the bulk drive or memory stick.
Per-Phone Configuration
This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone
configuration files. For more information, refer to Deploying Phones From the
Boot Server on page 3-14.
The parameters include:
• Registration <reg/>
• Calls <call/>
• Diversion <divert/>
• Dial Plan <dialplan/>
Attribute Permitted Values Default Interpretation
usb.enable 0, 1 Null This parameter enables or disables the USB
port on the phone.
Attribute Permitted Values Default Interpretation
usb.bulkDrive.enable 0, 1 Null This parameter enables or disables support for a
USB bulk drive connected to the USB port on
the phone.
usb.bulkDrive.name alphanumeric string usbDrive This parameter is a string which specifies the
name of the mounted USB drive.
Polycom recommends that you create another file with your organization’s
modifications. If you must change any Polycom templates, back them up first.
For more information, refer to the “Configuration File Management on SoundPoint
IP Phones” whitepaper at www.polycom.com/support/voice/.