Filter
Top Products
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc Page 53
Message Description Action
Bad Program File Handset software download files are
incorrect or corrupted
Download new software from the
SpectraLink site per
Software
Maintenance
.
(battery icon),
Battery Low,
beep (audio)
Low battery In call: the battery icon displays and a soft
beep will be heard when the user is on the
handset and the battery charge is low. User
has 15–30 minutes of battery life left.
The Battery Pack can be changed while the
call is still in progress. Do not press End
Call. Place call on Hold or Park. Quickly
remove the discharged battery and replace
with a charged battery, power on the
handset, and press Start Call to resume
the call in progress.
Not in call: The battery icon displays
whenever the battery charge is low The
message Battery Low and a beep indicate
a critically low battery charge when user is
not on the handset. The handset will not
work until the Battery Pack is charged.
Battery Failure The Battery Pack is not functioning. Replace the Battery Pack with a new or
confirmed SpectraLink Battery Pack. Any
non-Spectra-Link Battery Packs will not
work.
Battery Failed Battery Pack is damaged or incompatible
with handset.
Replace the Battery Pack with a new or
confirmed SpectraLink Battery pack. Any
non-SpectraLink Battery Packs will not
work.
Can’t Renew DHCP
yyy.yyy.yyy.yyy
y…y = DHCP server IP address
DHCP server is not responding to initial
renewal attempt
Configuration problem. Check the IP
address configuration in the DHCP server.
Charging … The handset is charging in the Desktop
Charger.
No action needed.
Charge Complete The handset is now fully charged. No action needed.
Checking Code Handset is contacting the TFTP server to
determine if it has a newer version of
software that should be downloaded.
None, this message should only last for
approximately one second. If message
remains displayed, power off and contact
customer support for a replacement
phone.
Checking DHCP IP The handset is retrieving DHCP information
from the DHCP server
None. This is informational only.
CRC Code Error The software which has been TFTP
downloaded has a bad redundancy code
check
Try the download again; it is possible the
software was corrupted during download. If
the error repeats, check that the download
image on the TFTP server is not corrupted.
Code Mismatch! The software loaded into the handset is
incorrect for this model handset
Verify the License Management value is
correct. Replace the software image on the
TFTP server with software that is correct for
the handset model.