Filter
Top Products
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc Page 36
7.1 Feature Assignment
The table below shows how the keys of the 5220 IP Phone are mapped to key
sequences on the handset.
5220 key Feature
Handset Shortcut
& Key Sequence
Trans/Conf Transfer or conference FCN + 1
Cancel Cancel FCN + 2
Message Voicemail FCN + 3
Redial Redial FCN + 4
Mute/Unmute FCN + 5
Programmable Feature Key 2-14
Programmable to either line
appearances or features.
If a feature, the feature name
appears on the Feature menu with
a shortcut key2 in the order of
assignment to a feature key.
FCN + 7
8
9
*
0
#
Feature Key #1 Line appearance Line + 1
If a line, the line extension
appears on the Line Appearance
list, with a line number that
corresponds to the order of
assignment to a feature key.
Line + 2
3
4
5
6
7
8
9
Softkey1 Phonebook (Phbk) Softkey A
Softkey2 Programmable Softkey B
Softkey3 Programmable Softkey C
Superkey Superkey FCN + 6
(Superkey)
Hold (in call) Hold Softkey D
(toggles between
Superkey and Hold)
If an Open Application Interface (OAI) is operational, a function key
sequence will be assigned in the OAI configuration and will override any
function sequence established in the PBX.
2
Note: There may be more features programmed than there are available shortcut keys. In this situation, the
feature may be activated by using the Up, Down, Select buttons on the side of the Wireless Telephone.