Polycom IP 560 Cordless Telephone User Manual


 
User Guide SoundPoint IP 560 Phone
3 - 10
Multiple Calls on Hold
If multiple calls are on hold on a single Line Key, use the and to
switch between the calls, then press the Resume soft key to retrieve the desired
call.
If more than two calls are on hold on a single Line Key, an indication appears
on the graphic display, for example “2/3”, indicating that this is the second
call out of three calls.
If calls are on hold on more than one Line Key, the details of the calls on any
Line Key can be viewed by pressing that Line Key and holding it down for a
more than two seconds. If a Line Key is depressed for less than a second, the
first call on hold on that Line Key will be retrieved.
Setting Up a Conference
You can create a conference with other parties using the phone’s local
conference feature.
To set up a conference:
1. Call the first party.
Note
You can either dial the phone number directly or search for the number in the
Contact Directory or Call Lists. For more information, refer to Placing a Call on page
3-2, Searching For a Contact on page 2-17, or Managing Call Lists on page 2-11.