Polycom IP 560 Cordless Telephone User Manual


 
Using the Basic Features of Your SoundPoint IP® 560 Phone
3 - 3
To place a call using the handset:
1. Do the following steps in any order:
Pick up the handset.
Dial the desired number using the dial pad.
To place a call using Hands-Free Speakerphone mode:
1. Do one of the following steps:
a With the handset on-hook, press , , or the
NewCall soft key to obtain dial tone.
Dial the desired number using the dial pad.
b With the handset on-hook, dial the desired number using the dial pad.
Press , , or the Dial soft key.
To place a call using the headset:
1. Do one of the following steps:
a With the optional headset connected, press or the
NewCall soft key to obtain dial tone.
Press .
Dial the desired number using the dial pad.
Note
You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press followed by followed by Status > Platform > Phone. The IP address is
listed together with other phone information. For example, 10.3.0.42, sip:
jane@polycom.com.
Press the Name soft key and enter the URL or IP address. Use * for “.” and # for
“@”. Then press the Send soft key to complete the call.
Support for SIP URL or IP address calling may be disabled. Contact your system
administrator.