Polycom 72-1004-01 Telephone User Manual


 
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 13
Setting User Preferences
When the handset is in standby mode (on but not in use), press and
briefly hold
FCN to display the Standby menu which allows you to set
user options. Check with your system administrator for specific
features supported by your handset.
Standby menu item 2
nd
Level 3
rd
Level 4
th
Level
Lock Keys
Language [List per download]
Ring Options Telephone Ring Ring Cadence Off
*PBX
Continuous
Short Pulse
Long Pulse
Ring Tone *Tone 1
Tone 2
Tone 3
Tone 4
Tone 5
Ring Volume+ Bars
Vibrate Cadence *Off
PBX
Continuous
Short Pulse
Long Pulse
Ring Delay** *No Delay
5 Second Delay
10 Second Delay
Auxiliary Ring 1
Auxiliary Ring 2
Phone Options Noise Mode *Normal
High
Severe
Key Tones *Enable Tones
Disable Tones
Warning Tones *Enable warnings
Disable warnings
Display Contrast Contrast %
Keypad Autolock *Disable
5 seconds
10 seconds
20 seconds
System Info Phone IP Addr
Gateway IP Addr
Firmware Version
Extension
Push-to-talk+ Channel Current Channel: X
1 2 3 4 5 6 7 8
New Channel = ?
Enable/Disable PTT Enabled
*PTT Disabled
Audio Volume Bars
Tone Volume Bars
* Default setting
**shows up when Ring Cadence and Vibrate Cadence are both set to a value other than “Off”
+ These options are available only on the NetLink i640 Wireless Telephone