Filter
Top Products
Deployment Guide for the Polycom VVX 1500 C
3 - 6
Configuring Your System
After you set up your Polycom VVX 1500 C phones on the network, you can
allow users to place and answer calls using the default configuration,
however, you may require some basic changes to optimize your system for
best results.
This section provides information for making configuration changes for:
• Local Digit Map (or Dial Plan)
• Call Transfer
• Call Log
• Recording and Playback of Audio Calls
• Corporate Directory
• Digital Picture Frame
• Server Redundancy
• Voice Mail Integration
To troubleshoot any problems with your Polycom VVX 1500 C phones on the
network, refer to Troubleshooting the Polycom VVX 1500 C Phone on page
4-1.
Local Digit Map
The phone has a local digit map feature to automate the setup phase of
number-only calls. When properly configured, this feature eliminates the need
for using the Dial or Send soft key when making outgoing calls. As soon as a
digit pattern matching the digit map is found, the call setup process will
complete automatically. Digit maps do not apply to on-hook dialing.
For more information digit maps, refer to “Technical Bulletin 11572: Changes
to Local Digit Maps on Polycom VVX 1500 C Phones“ at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html .
Configuration changes can be performed centrally at the provisioning server
or locally. For detailed information on configuration file settings, refer to Dial
Map <dialmap/> on page A-3.