Filter
Top Products
PLANET VIP-101T CLI configuration
- 38 -
Back Tone PCM file and Hold Tone. In most circumstances, upgrade the main application
image can retrieve the latest features or maintenance, no other file required. If there are
additional demands for other kinds of image file, we’ll include in the firmware release for
customer’s most convenience.
To perform firmware upgrade, you’ll need to setup a TFTP server or FTP server to complete
upgrade process. Please consult experienced personnel to prepare related service.
Syntax Description
-app Update main application code
Default
This command has no default value.
c) -boot2m
Parameter –boot2m is used to upgrade 2mb firmware file, which includes all firmware
image files mentioned in section b)
Syntax Description
-boot2m Update 2M firmware file.
Default
This command has no default value.
d) -s
Parameter –s is used to specify the IP address of the destination TFTP/FTP server, which
contains the firmware file for upgrade. It is required to prepare a TFTP/FTP server before
performing firmware upgrade.
Syntax Description
-s IP address of TFTP/FTP server
Default
192.168.0.2 (it is necessary to change this parameter to reflect TCP/IP configurations on
your side.)
e) -f
Parameter –f is used to specify firmware file name prepared for upgrading on the destination