Filter
Top Products
PLANET VIP-101T CLI configuration
- 4 -
M
Note
When download or receive firmware upgrade from your service provider, it is required
to perform a “flash -clean” to a
ctivate new configuration in machine. <Machine default
IP address: 192.168.0.1, Web/Telnet logon username: root
; password: <null>, press
<Enter> to log in machine..
5. [commit]
This command is used to save any changes after configuring VIP-101T.
Syntax Description
This command has no arguments or keywords
Default
This command has no default value.
Example
M
Note
When download or receive firmware upgrade from your service provider, it is required
to perform a “flash -clean” to activate new confi
guration in machine. <Machine default
IP address: 192.168.0.1, Web/Telnet logon username: root
; password: <null>, press
<Enter> to log in machine..
6. [ifaddr]
Command ifaddr is used to configure and display TCP/IP related information in VIP-101T.
There are sub parameters in this menu, please insert “ifaddr” to display related parameters
for configuration.
usr/config$ flash
Flash memory information and configuration
Usage:
flash -clean
Note:
This command will clean the configuration stored in
the flash and reboot it.
usr/config$ commit
usr/config$
This may take a few seconds, please wait....
Commit to flash memory ok!