Planet Technology VIP-101T Telephone User Manual


 
PLANET VIP-101T CLI configuration
- 2 -
Copyright
Copyright (C) 2003 PLANET Technology Corp. All rights reserved.
The products and programs described in this Users Manual are licensed products of PLANET
Technology, This Users Manual contains proprietary information protected by copyright, and this
Users Manual and all accompanying hardware, software, and documentation are copyrighted.
No part of this Users Manual may be copied, photocopied, reproduced, translated, or reduced to
any electronic medium or machine-readable form by any means by electronic or mechanical.
Including photocopying, recording, or information storage and retrieval systems, for any purpose
other than the purchaser's personal use, and without the prior express written permission of
PLANET Technology.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and
applications, and makes no warranty and representation, either implied or expressed, with respect
to the quality, performance, merchantability, or fitness for a particular purpose.
PLANET has made every effort to ensure that this Users Manual is accurate; PLANET disclaims
liability for any inaccuracies or omissions that may have occurred.
Information in this Users Manual is subject to change without notice and does not represent a
commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that
may be contained in this Users Manual. PLANET makes no commitment to update or keep
current the information in this Users Manual, and reserves the right to make improvements to this
Users Manual and/or to the products described in this Users Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would
appreciate your comments and suggestions.
FCC Compliance Statement
This equipment generates and uses radio frequency energy and if not installed and used properly,
that is, in strict accordance with the instructions provided with the equipment, may cause
interference to radio and TV communication. The equipment has been tested and found to comply
with the limits for a Class A computing device in accordance with the specifications in Subpart B of
Part 15 of FCC rules, which are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that interference will not
occur in a particular installation. If you suspect this equipment is causing interference, turn your
Ethernet Switch on and off while your radio or TV is showing interference, if the interference