Filter
Top Products
PLANET VIP-101T CLI configuration
- 11 -
usr/config$ pbook -print
index Name IP E164
====================================================================
1 test1 210.66.155.90 5555
2 test2 vip.planet.com.tw 0
-----------------------------------------------------------------
usr/config$ pbook -print 1 1
index Name IP E164
===================================================================
1 test1 210.66.155.90 5555
-------------------------------------------------------------------
usr/config$ pbook -print 1 2
index Name IP E164
===================================================================
1 test1 210.66.155.90 5555
2 test2 vip.planet.com.tw 0
--------------------------------------------------------------------
a) –print
Parameter print can be used to display phone book database information. You can display
all data in phone book by adding –print parameter. Furthermore, you like to display a section
of data, indication parameter 'start_record' and 'end_record' can be used (pbook –print
“start index #” “end index #”). If parameter 'end_record' is omitted, only record
'start_record' will be display (pbook –print “start index #”).
Syntax Description
-print [start index #] [end index #] Display phonebook data.
Default
This command has no default value.
Example
b) -add
Parameter add is used to create a new entry in phone book table by give a name and e164
number for the Gateway / Terminal IP address.
Syntax Description
–add name “X” ip “xxx.xxx.xxx.xxx” e164 “X”)
Default