Filter
Top Products
iPod isnot charged butoperates
correctly
Check ifthe connection cablefor iPod
shorted out(e.g., not caughtin metal ob-
jects). Afterchecking, turn theignition switch
OFFand backON ordisconnect theiPodand
connect again.
The connectedUSB portable audio
player/USB memory consumes
more than500 mA(maximum allow-
able current).
Check ifthe connection cablefor iPod
shorted out(e.g., not caughtin metal ob-
jects). Afterchecking, turn theignition switch
OFFand backON ordisconnect theiPodand
connect again.
Error hasoccurred when connect-
ing theiPodto this unit
Reconnect theiPod.
Turnthe ignition switchto OFF, then toACC
or ON.
Update theiPodversion.
Understanding auto TA and EQ error messages
When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
Message Cause Action
Error.Please check MIC. Microphone isnot connected. Plug thesupplied microphone securelyinto
the jack.
Error.Please check frontSP.,
Error.Please check FLSP.,
Error.Please check FRSP.,
Error.Please check centerSP. ,
Error.Please check rearSP.,
Error.Please check RLSP.,
Error.Please check RRSP.,
Error.Please check subwoofer
The microphonecannot pick upthe
measuring toneof a speaker.
! Confirmthat the speakersare connected
correctly.
! Correctthe input levelsetting of thepower
amp connectedto the speakers.
! Setthe microphone correctly.
Error.Please check noise. Thesurrounding noiselevel istoo
high.
! Stopyour car ina placethat is asquiet as
possible, andswitch off theengine, air condi-
tioner orheater.
! Setthe microphone correctly.
<CRB2972-A/N>89
Additional Information
En
89
Appendix
Additional Information