Filter
Top Products
Notes
! When playing discs that do not specify
PAN SCAN, playback is with LETTER BOX
even if you select PAN SCAN setting. Confirm
whether the disc package bears the
16 : 9 LB
mark. (Refer to page 14.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc’s instruc-
tions.
Setting the parental lock
Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set the par-
ental lock to your desired level.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
You need to have registered a code number for
playing back discs with parental lock.
1 Touch NEXT on the DVD setup menu.
2 Touch PARENTAL.
3 Touch 0 to 9 to input a four digit code
number.
# To cancel the inputted numbers, touch C.
4 Touch ENTER.
The code number is set, and you can now set
the level.
5 Touch any of 1 to 8 to select the desired
level.
The parental lock level is set.
! LEVEL 8 – Playback of the entire disc is pos-
sible (initial setting)
! LEVEL 7 to LEVEL 2 – Playback of discs for
children and non-adult-oriented discs is
possible
! LEVEL 1 – Playback of discs for children
only is possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
Look for the level indication written at the disc
package, included literature or on the disc it-
self. Parental lock of this unit is not possible if
a parental lock level is not recorded in the
disc.
! With some discs, the parental lock may be ac-
tive only on the scenes with certain levels. The
playback of those scenes will be skipped. For
details, refer to the instruction manual that
came with the discs.
Changing the level
You can change the set parental lock level.
1 Touch NEXT on the DVD setup menu.
2 Touch PARENTAL.
3 Touch 0 to 9 to input the registered
code number.
4 Touch ENTER.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon
is displayed. Touch C and input thecor-
rect code number.
# If you forget your code number, refer to If you
forget your code number on this page.
5 Touch any of 1 to 8 to select the desired
level.
The new parental lock level is set.
If you forget your code number
Please see the following section, and touch C
10 times. Refer to Changing the level on this
page. The registered code number is canceled,
letting you register a new one.
<
CRB2972-A/N>40
Operating this unit
En
40
Section
03