Filter
Top Products
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
! If you select Linear PCM, when playing a
disc recorded on a dual mono mode, you
can operate this function. (Refer to Setting
for digital output on page 41.)
% Touch L/R SELECT on the function menu
to select the audio output.
Touch L/R SELECT repeatedly until the desired
audio output appears in the display.
! L+R – left and right
! LEFT – left
! RIGHT – right
! MIX – mixing left and right
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not pos-
sible.
Using compression
Using the COMP (compression) function lets
you adjust the sound playback quality of this
unit.
% Touch COMPRESSION on the function
menu to select your favorite setting.
OFF—COMP1—COMP2
Playing songs on iPod
Basic Operations
You can use this unit to control an iPod by
using a cable (e.g., CD -IU205V), which is sold
separately.
1 Source icon
2 Repeat indicator
Shows when repeat range is set to ONE or
ALL.
3 Song number indicator
4 Title indicator
5 Shuffle indicator
Shows when random play is set to SONGS or
ALBUMS.
6 Play time indicator
7 Song information
Shows detailed information of currently play-
ing song.
8 Battery charging indicator
Shows when the battery chargesetting is on.
1 Connect the iPod to this unit.
Playback will automatically start.
While connected to this unit, PIONEER, Acces-
sory Attached or
(check mark) is displayed
on the iPod.
# Before connecting the dock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
# Depending on the model of iPod or the data
size in the iPod, there may be a delay to start play-
ing after connection.
# After the iPod has been connectedto this
unit, use touch panel keys to select the iPod.
<CRB2972-A/N>30
Operating this unit
En
30
Section
03