Filter
Top Products
% Press and hold OPEN/CLOSE to turn the
LCD panel horizontal.
# To return to originalposition, press and hold
OPEN/CLOSE again.
# The LCD panel returns to the original position
automatically with beeping sound 10 seconds
after operation.
Radio
Basic Operations
1 Source icon
2 Band indicator
3 Preset number indicator
4 Frequency indicator
5 LOCAL indicator
Appears when local seek tuning is on.
6 5 (stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
1 Touch the source icon and then touch
RADIO to select the radio.
2 Touch BAND to select a band.
Touch BAND until the desired band (FM1,
FM2, FM3 for FM or AM) is displayed.
3 To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press-
ing c or d (TRACK).
4 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing
and holding c or d (TRACK).
<CRB2972-A/N>20
Operating this unit
En
20
Section
03