Filter
Top Products
7
B-1 Setting the speed dial keys
• Press any buttons from M1 to M10 to select
• The system will display the current setting (Blank if no previous setting)
• Using the keypad to input the IP address or Phone Numbers.
For Example: “4 38 32 255 #” for setting up the IP address
“ 0 5551234 #” for setting up the telephone Number.
B-2 Using the Speed Dial Keys
• Press any button of the speed dial keys from M1 to M10 to Dial
Please Select
Speed Dial Key
Phone Number:
4. 38. 32.255
OK
M1 M10
~
M1 M10
~
• Press “OK” to save and quit SPEED Dial Setup Mode.
SPEED DIAL
3. HOW TO SET UP
B. SPEED DIAL
C. HOLD (MUTE)
After pressing the “HOLD” key, both local & remote side of the communication line will only hear the
music playing. (This function only available when codec set as G.723.1 or G.729)
This function is available only when both phone support H.450 call transfer. Upon placing a phone
call, you can use “call transfer” function to transfer the call to other person. For example: when A is
talking to B. A could press “Flash” key and the display will show “Transfer to”. A can enter the IP
address of C and A will be talking to C. After A hanging up the phone, C can talk with B.
HOLD HOLD
Put on “HOLD” with background music Press again to stop the function
D. VOLUME ADJUSTMENT
E. CALL TRANSFER
Speaker Volume Handset Volume Ringer Voume
Click ‘SPEAKER’ while
handset is on the hook
Select up/down to set
speaker volume
Pick up the handset,
Select up/down to set
Handset volume
When IP Phone is on
standby mode, Select
up/down to set Ringer
Volume
VOLUME
Note:
• M1~M10 setup enable you to do speed dial on your VoIP PHONE.
• Gateway shortcut dial 1~ 5 allows user to access the VoIP PHONE remotely through regular
telephone or another VoIP PHONE.
The remote user simply connect to VoIP PHONE and dial “ 1 #”