Philips XL 665 Answering Machine User Manual


 
Important 5
product. Dispose of used batteries
according to the instructions.
Recommended type:
Philips 1.2V
600mAh AAA re-chargeable
batteries, Multi-Life 600mAh
Handsfree activation could suddenly
increase the volume in the earpiece to
a very high level: make sure the
handset is not too close to your ear.
This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
Do not expose the phone to excessive
heat caused by heating equipment or
direct sunlight.
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
Do not use the product in places
where there are explosive hazards.
Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
Active mobile phones in the vicinity
may cause interference.
About operating and storage
temperatures:
Operate in a place where temperature
is always between 0 and 35º C.
Store in a place where temperature is
always between -20 and 45º C.
Battery life may be shortened in low
temperature conditions.
Warning
Metallic objects may be retained if placed
near or on the handset receiver.
1.2 Using GAP standard
compliance
The GAP standard guarantees that all
DECT™ GAP handsets and base stations
comply with a minimum operating
standard irrespective of their make.
XL665 handset and base station are GAP
compliant, which means they guarantee
the minimum functions: register a
handset, take the line, make a call and
receive a call. The advanced features may
not be available if you use them with
other makes.
To register and use XL665
handset with a GAP compliant base
station of different make, first follow the
procedure described in the
manufacturer’s instructions, then follow
the procedure described in this
manual for registering a handset.
To register a handset from different make
to XL665 base station, put the
base station in registration mode, then
follow the procedure described in the
handset manufacturer’s instructions.
1.3 Conformity
We, Philips declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
!
XL665_IFU_GB.book Page 5 Wednesday, October 14, 2009 4:36 PM