Filter
Top Products
28 Advanced Settings
11 Advanced Settings
Discover and explore the additional
settings your phone offers! Find out how
these features can benefit you and help
you make the most of your phone.
11.1 ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
Press
MENU
.
Select
ADV. SETTING
>
ECO
, then
press
OK
to confirm.
Select the new setting, then press
OK
to confirm.
• The setting is saved.
• is displayed instead of in
standby mode.
Note
When the ECO mode is activated, the
connection range between the handset
and the base station can be reduced.
11.2 Registering handset(s)
The procedures described below are the
procedures you will find in your handset.
The procedures may vary according to the
handset you want to register. In this case,
refer to the manufacturer's instruction of
the additional handset.
Additional handsets must be registered to
the base station before you can use them.
Your base station can register up to 5
handsets. The system PIN may be required
for registering or unregistering handsets.
11.2.1 Auto registration
Place the handset on the base station.
The handset will detect the base and
start to register automatically.
• Registration shall be completed in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
11.2.2 Manual registration
If the base station is of a different make
from XL665, the handset and base linking
may not be achieved during auto
registration mode. Follow the
instructions below to register your
handset manually to the base station.
Press
MENU
.
Select
ADV. SETTING
>
REGISTRATION
. Press
OK
.
• The display shows
PRESS PAGE
KEY FOR 5 SEC
.
Press
OK
to continue.
On the base station, press and hold
_ for approximately 5 seconds.
Enter the system PIN (Pre-set: 0000).
Use
CLEAR
to make corrections.
Press
OK
to confirm the PIN.
• Registration shall be completed in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
Note
If the PIN is incorrect or no base is found
within a certain period, your handset
displays a notification message. Repeat
the above procedure if registration failed.
Note
The pre-set system PIN code is 0000 and
it cannot be changed.
1
2
3
1
1
2
3
4
5
6
XL665_IFU_GB.book Page 28 Wednesday, October 14, 2009 4:36 PM