Filter
Top Products
4Important
1Important
This product is not designed for making
emergency telephone calls when the
power fails. Alternative arrangements
should be made for access to emergency
services.
1.1 Power requirements
• This product requires an electrical
supply of 100-240 volts, single-phase
alternating current, excluding IT
installations defined in standard EN
60950 and AS/NZS 60950.1.
• The electrical network is classified as
dangerous according to criteria in the
standard EN 60950 and AS/NZS
60950.1. The only way to power down
this product is by unplugging the
power supply from the electrical
outlet. Ensure the electrical outlet is
located close to the apparatus and is
always easily accessible.
• The voltage on the network is classified as
TNV-3 (Telecommunication Network
Voltages, as defined in the standard EN
60950 and AS/NZS 60950.1). Following a
power cut, the call in progress, as well as
the date and time settings will be lost.
Warning
• Do not allow the handset to come into
contact with liquids or moisture.
• Do not open the handset, base station
or charger. This could expose you to
high voltages.
• Do not allow the charging contacts or
the battery to come into contact with
conductive materials.
• There is a slight chance that your
product could be damaged by an
electrical storm. We recommend that
you unplug the product from the
power supply and telephone socket
during a storm.
• Do not use the handset in an explosive
hazard area such as where there is gas
leaking.
• It is recommended that this product is
not used near intensive care medical
equipment or by persons with
pacemakers.
• This product can interfere with electrical
equipment such as answering machines,
television, radio, and computers if placed
too close. We recommend that you
position the base station at least one
meter from such appliances.
• Use only the mains adapter supplied
with this equipment. Incorrect adapter
polarity or voltage can seriously
damage the unit.
Base adapter:
Philips S005CB0500050 (for UK & IE only)
or S005CS0500050 (for AUS. & N.Z. only)
Input: 100-240VAC/150mA, 50/60 Hz
Output: 5 VDC, 500mA
Charger adapter:
Philips S002CB0500021 (for UK & IE only)
or S002CS0500021 (for AUS. & N.Z. only)
Input: 100-240VAC/100mA, 50/60 Hz
Output: 5 VDC, 210mA
• CAUTION: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. Use only with
Philips, type no.: Multi-Life 600mAh
(2x 1.2V AAA 600mAh Ni-MH)
rechargeable battery. Use only the
recommended type supplied with this
!
XL665_IFU_GB.book Page 4 Wednesday, October 14, 2009 4:36 PM