Filter
Top Products
Answ
er
ing machine
32
6.6.5 Call screening on handset
If Call screening is set to ON,when there is an
incoming message, you can press to start
call screening.If you decide to pick up the call,
press .Once the call has been picked up, the
recording will stop automatically.
Press to access the main menu
Press / to select ANS. MACHINE
Press and / to select SETTINGS
Press and / to select
SCREENING
Press to select ON or OFF
Press to save the settings
Note
During call screening,user cannot stop the call
screening,only and / on handset can
be used.
6.6.6 Call screening on base
When the answering machine picks up the call,
call screening on base will be turned on if the
volume level is not at
00
.You can press
to turn the base volume level to
00
to turn off
the call screening on base.
6
5
4
3
2
1
Press and / to select
ACTIVATE or DEACTIVATE
Press to save the settings
6.6.4.3 How to remotely access your
answering machine
Place a call from your external phone to
your CD445
When the answering machine answers the
call and starts playing the outgoing message,
press to enter #
Enter the 4-digit remote access PIN
Note
If the PIN is correct, recorded messages would
be played back automatically.
However,if the PIN is incorrect, an error tone
would be heard, you can retry to enter the
remote access PIN again.
If retry PIN is still incorrect,the answering
machine will drop the line immediately.
If there are messages, all the new messages will
be played immediately and then old messages
will be played after a long beep.
Press the following keys to carry out the
desired function
Keys Description
1 Skip to the previous message
2 Play the message
3 Skip to the next message
6 Delete the playing message
7 Turn on the answering machine
8 Stop message playback
9 Turn off the answering machine
# Enter the remote access code if the
answering machine is on and outgoing
message is playing
Note
If the answering machine is off, the phone will
enter into the remote access mode after
10 rings. User can then enter the 4-digit remote
access
PIN (default is 0000) to activate the
remote access feature.
4
3
2
1
6
5