Philips CD445 Cordless Telephone User Manual


 
Answering machine
31
6.6.1.1.2 Use the predefined outgoing
message
If you set your outgoing message as
PREDEFINED, press / to access the
following :
Options Description
available for
Predefined
Outgoing
Messages
LANGUAGE* Press and / to
select your desired outgoing
message language
PLAY MESSAGE Press to play back the
predefined outgoing message.
Note
* Depending on your country, your phone may
have only one outgoing message language.
6.6.2 How to set ring delay
You can set the number of rings before the
answering machine answers and starts playing
your greeting message.You can set the
answering machine to answer after three to
eight rings or economy.
Press to access the main menu
Press / to select ANS. MACHINE
Press and / to select
SETTINGS
Press and / to select RING
DELAY
Press and / to select the number
of rings from 3 rings to 8 rings or
ECONOMY
Press to save the settings
Note
Economy mode can save you the cost of a long-
distance call when you check your messages
remotely. If there are new messages in your
answering machine, the outgoing message will
start playing after three rings. If there are no new
messages, the outgoing message will be played
after five rings.Hence,if you want to check if you
have any messages without incurring call charges,
you can hang up the call after the fourth ring.
6
5
4
3
2
1
6.6.3 How to set message tone
An alert tone sounds periodically when there is
new message.You can turn on or off this
message alert tone.The default setting is OFF.
Press to access the main menu
Press / to select ANS. MACHINE
Press to select SETTINGS
Press to select MESSAGE TONE
Press to select ON or OFF
Press to save the settings
6.6.4 Remote control access
This feature lets you check your messages, or
otherwise operate your answering machine, by
calling the answering machine when you are
away from home on a tone dialling phone.
6.6.4.1 How to change remote access PIN
Your phone lets you check your messages or
operate your answering machine by entering a
4-digit remote access PIN on a tone-dialing
phone.
Press to access the main menu
Press / to select ANS. MACHINE
Press and / to select
SETTINGS
Press and / to select
CHANGE
PIN
Press to enter the default/current 4-
digit remote access PIN when prompted
(Default remote access PIN is 0000)
Press to enter the new remote access
PIN
Press to enter the new remote access
PIN again
Press to save the settings
6.6.4.2 How to activate/deactivate
remote access
Press to access the main menu
Press / to select ANS. MACHINE
Press and / to select SETTINGS
Press and / to select REMOTE
ACC.
4
3
2
1
8
7
6
5
4
3
2
1
6
5
4
3
2
1