Filter
Top Products
Use more of y
our phone
18
Key 2 will not display. If voice mail number and
information service number of your network
operator are unavailable, Key 1 and Key 2 will
display on top of Key 3 as the direct access
memory options, see section 5.8.2 for details.
In idle mode :
Press to access the main menu
Press to select PHONEBOOK
Press / to scroll to DIRECT MEM.
Press and / to scroll to a direct
access memory location from KEY 1 to
KEY 9
Press twice to select ADD
Press and / to select the
phonebook entry that you wish to store
into the selected direct access memory
Press to confirm
• A beep tone is emitted and your phonebook
entry is saved into the selected direct access
memory key.
Tip
Long press the direct memory key will dial out
the phone number directly.
5.2.7 How to transfer the phonebook
This feature allows you to transfer the
phonebook from one handset to another
handset when there are at least two handsets
registered to your base station.
In idle mode :
Press to access the main menu
Press to select
PHONEBOOK
Press / to scroll to PHB
TRANSFER
Press
• The handsets available for phonebook transfer
are displayed.
Note
If there are more than two handsets, you can
press / to select a specific handset.
The called handset will prompt with a
message “TRANS. FROM”
To accept the phonebook transfer, press
on the called handset or press to reject
the phonebook transfer
6
5
4
3
2
1
7
6
5
4
3
2
1
• All your phonebook entries are transferred to
the called handset and FINISH is displayed on
the two handsets screen after the transferring is
done.
5.3 Call log
This feature is available if you have registered to
the caller identification service (CLI) with your
network operator.
Your phone can store up to 50 unanswered
calls. and the LED on the handset will blink
to remind you of any unanswered calls received.
If the identity of the caller is not withheld, the
name (or number) of the caller will be
displayed.The unanswered calls are displayed in
chronological order with the most recent
unanswered call at the top of the list.
Warning
Call back from the call list may not work for all
received numbers.
5.3.1 How to access the call log
You can review the caller ID with alternate
dialing sequences.You can then make a call with
the selected dialing sequence directly or store
this number in your phonebook.
Press to access the call log
Press to enter CALL LIST
• The latest unanswered call is displayed.
Press / to view the entries
Press repeatedly to view the alternate
dialing sequences
The screen will scroll through the various
possible dialing options (e.g. 1 + area code+
number,area code + number, 1 + number,
number only).
You must choose the correct format to dial the
area code and number of the call log record
chosen.The original incoming number from the
call log will appear as a 7, 10 or 11-digit number.
If it is a long distance call, the prefix digit 1 will
automatically appear in front of the 10-digit
local calls.
When viewing the call log, press to
change the f
ormat of the call log displa
y as it
should be dialled from your location.
1
4
3
2
1
!