Filter
Top Products
22
Introduction and Installation
4 Mount the monitor station to the mounting bracket.
Push the monitor station down until it is secure.
5 Take out the AC adaptor and the DC terminal from the case.
LPush the arrow mark on the front case, then release from the rear case.
LTake out the cardboard and wood screws. The wood screws are necessary when
attaching the AC adaptor and the DC terminal to a wall (page 24).
1
2
AC adaptor
DC terminal
Arrow mark
G201CE(E).book Page 22 Friday, November 11, 2005 4:46 PM