Preparation
For assistance, please call 1-800-211-PANA (7262). 9
Connections
Base unit
Charger unit (KX-TG5422 and KX-TG5423 only)
Note:
LBase unit: Use only the included Panasonic AC adaptor PQLV1.
LCharger unit: Use only the included Panasonic AC adaptor KX-TCA1.
LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the
adaptor may cause it to become disconnected.
LThe unit will not work during a power failure. We recommend connecting a standard
telephone to the same telephone line or to the same telephone jack using the Panasonic
KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting a
Panasonic battery back-up power supply noted on page 5.
Fasten the AC adaptor cord.
Hook
AC adaptor
Raise the antennas.
Telephone line cord
To single-line telephone jack (RJ11C)
To power outlet (120 V AC, 60 Hz)
AC adaptor
To power outlet (120 V AC, 60 Hz)