Panasonic KX-TG5421 Telephone User Manual


 
Useful Information
For assistance, please call 1-800-211-PANA (7262). 47
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
*1 KX-TG5422 and KX-TG5423 only
Display message Cause & solution
Busy LThe called handset is in use.
*1
LThe handset you tried to copy phonebook items to is in
use.
*1
LThe handset you are calling is too far from the base
unit.
*1
Error!! LWhen you tried to register the handset, the handset and
the base unit could not link for some reason, such as
interference from electrical appliances. Move the
handset and the base unit away from the electrical
appliances and try again.
LAnother handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
send the items to you (page 23).
*1
---Incomplete---
Phonebook full
LWhen the phonebook item(s) was(were) sent to another
handset, the handset’s phonebook memory was full
and copying stopped. Press {OFF} to exit. Erase items
from the other handset’s phonebook (page 22). When
phonebook memory is available, you can copy all
phonebook items (page 24) or individual items one by
one (page 23, 24).
*1
No link to base.
Move closer to
base, try again.
LThe handset has lost communication with the base unit.
Move closer to the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged in.
LRaise the base unit antennas.
LThe handset’s registration may have been canceled.
Re-register the handset (page 40).
Phonebook full LThere is no space to store new items in the phonebook.
Erase unnecessary items (page 22).
No items stored L Your phonebook or redial list is empty.
Please lift up and
try again.
LA handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.
System is busy.
Please try again
later.
LThe handset has lost communication with the base unit.
Move closer to the base unit and try again.
LMore than one unit is in use. Try again later.
*1
Store VM access# LYou have not stored the Voice Mail access number.
Store the number (page 33).