Filter
Top Products
Useful Information
For assistance, please call 1-800-211-PANA (7262). 51
Battery charge
Power failure
Problem Cause & solution
“Recharge battery” is
displayed, 7 flashes
or the handset beeps
intermittently.
LFully charge the battery (page 11).
“Charge for 6h” and
8 are displayed and
the handset does not
work.
LThe battery has been discharged. Fully charge the
battery (page 11).
I charged the battery fully,
but “Recharge
battery” is still
displayed and/or 7
continues to flash, or
“Charge for 6h” and
8 are displayed.
LClean the charge contacts and charge again (page 11).
LThe battery may need to be replaced (page 12). If you
install a new battery, fully charge it (page 11).
The CHARGE indicator
does not go out after the
battery has been
charged.
LThis is normal.
The handset display is
blank.
LConfirm that the battery is properly installed.
LFully charge the battery (page 11).
Problem Cause & solution
The unit will not function. LThis product is not designed to make calls in the event
of a power failure. We recommend connecting a
standard telephone to the same telephone line in the
event that emergency calls need to be made during a
power failure (page 9).