Filter
Top Products
61
Troubleshooting
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
You cannot redial. • If the last number dialed was more than 32
digits long, the number will not be redialed
correctly.
• The button functions as either redial or
pause. It will redial the last number dialed if
pressed at the outset of a call (p. 22, 24). If
another number has been dialed first, it will
operate as a pause button (p. 49).
“ ”
is not displayed
properly.
The VM indicator does not
flash properly.
• The line mode selection is incorrect. Set line
mode to “A” (p. 17).
“Recharge battery” is
displayed, “ ” flashes
or the cordless handset beeps
intermittently.
• Charge the battery fully (p. 11).
“Charge for 15HRS” and
“” are displayed and the
cordless handset does not
work.
• The battery has been discharged. Charge the
battery fully (p. 12).
You charged the battery fully,
but “Recharge battery” is
still displayed and/or “ ”
continues to flash, or “Charge
for 15HRS” and “ ” are
displayed.
• Clean the charge contacts and charge again
(p. 12).
• Install a new battery (p. 11, 12).
The CHARGE indicator does
not go out after the battery
has been charged.
• This is normal.
If you cannot solve your
problem
• Call our customer call center at
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY
Problem Cause & Remedy
IN USE