Filter
Top Products
Special Features
50
FLASH Button
Pressing [FLASH/CALL WAIT] also allows you to use special features of your host
PBX such as transferring an extension call or accessing optional telephone
services such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels the Temporary Tone Dialing mode or the
mute (p. 48).
Selecting the flash time (use either or )
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
• If the unit is connected via a PBX, PBX functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for the correct settings.
Press [CONF/FUNCTION], and follow steps 2 to 5 above, using the
cordless handset. Press the soft key ( ), then press [OFF].
1 Press [FUNCTION/EDIT].
2 Scroll to “Initial setting” by pressing
[] or [], then press
[]
.
3 Scroll to “Set tel line” by pressing [] or
[], then press
[]
.
4 Scroll to “Set flash time” by pressing []
or [], then press
[]
.
5 Select the flash time by pressing [] or [].
6 Press
[]
(Save), then press [EXIT].
Base Unit Handset
Base Unit
Handset
Base Unit
▼
Initial setting
▼
Set tel line
▼
Set flash time
Set flash time
:700ms
▼
Handset
SA VE