Filter
Top Products
Room Monitor Feature
42
•You can also turn on/off the base unit Room Monitor feature, by using the cordless
handset. Perform the following steps:
(1) Press [CONF/FUNCTION].
(2) Scroll to “Initial setting” by pressing [] or [], then press [].
(3) Scroll to “Set base unit” by pressing [] or [], then press [].
(4) Scroll to “Room monitor” by pressing [] or [], then press [].
(5) Select “On” or “Off” by pressing [] or [], press
the soft key ( ), and
press [OFF].
To monitor with
The destination cordless handset must not be in use.
To monitor with
The destination unit must not be in use.
• The monitored user can stop being monitored by:
– on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or
[DIGITAL SP-PHONE].
– on the cordless handset, press [OFF].
•“Room monitor” is also displayed on the monitored unit.
• While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/
TRANSFER indicator flashes and the DIGITAL SP-PHONE indicator lights.
1 Press [LOCATOR/INTERCOM/TRANSFER],
then press [MUTE].
2 To call the cordless handset, press the
extension number ([1] to [8]).
•To monitor from the base unit handset, lift it off
the cradle. To switch back to the speaker, press
[DIGITAL SP-PHONE].
3 To end monitoring, place the handset on the cradle, or if using
the speakerphone, press [LOCATOR/INTERCOM/TRANSFER] or
[DIGITAL SP-PHONE].
1 Press [HOLD] (INTERCOM), then press the soft key ( ).
2 To call the base unit, press [0].
To call another cordless handset, press its
extension number ([1] to [8]).
•To monitor from the speaker, press []. You can
place the cordless handset on the charger. To
switch back to the receiver, press [].
3 To end monitoring, press [OFF].
▼
▼
▼
SA VE
Base Unit
Press extension#
to call
MUTE=Monitor
Press extension#
for room monitor
Room monitor
00-00-05
01
Handset
MONITOR
Press extension#
for room monitor
Room monitor
00-00-05
01