Panasonic KX-TG2750S Telephone User Manual


 
55
Canceling Registration/Re-registration
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Re-registering the Handset
If you want to re-register the cordless handset to the base unit or a different base
unit of the same model, you need to register it to that base unit. The cordless
handset will be given a new extension number of that base unit. Only one cordless
handset can be registered at a time near the base unit.
Make sure the base unit and the other cordless handsets are not being used.
Registration must be completed within 1 minute.
•You can stop registration by pressing [OFF] on the cordless handset and pressing
[MUTE] on the base unit.
If you have canceled handset registration at a previous base unit (p. 54), start
from step 5.
1 Cordless handset:
Press [CONF/FUNCTION].
2 Cordless handset:
Scroll to “Initial settingby pressing
[] or [], then press
[]
.
3 Cordless handset:
Scroll to “Registrationby pressing []
or [], then press
[]
.
4 Cordless handset:
Press [] at “HS registration”.
5
Base unit: Press [MUTE].
The MUTE indicator flashes.
6 Cordless handset:
(1) Press the soft key ( ).
(2) Wait until a long beep sounds and the
display shows the number.
• Registration is complete.
If you have not canceled the cordless handset registration at the previous base
unit (p. 54), the handset number still remains on that base unit memory. To erase
the handset number from the previous base unit, see the base unit Operating
Instructions. For KX-TG2750S base unit: (1) Press [FUNCTION/EDIT], (2) Press
[MUTE], (3) Enter “335#”, and (4) Enter that handset number (1 to 8).
Base Unit & Handset
Initial setting
Registration
HS registration
OK
Press MUTE on
base unit, then
OK on handset to
register handset
Handset [2]
Registered
[2]
Ex. Extension number 2