Filter
Top Products
21
Basic Operation
For assistance, please call: 1-800-211-PANA(7262)
Making Calls
Using the Base Unit
You can make a call by simply lifting the handset off the cradle and dialing a
phone number. To hang up, place the handset on the cradle.
•“Talk” is displayed while using the handset.
To have a hands-free phone
conversation
To adjust the handset/speaker volume while talking
3 levels (High, Medium and Low) are available for the
handset and 8 levels for the speaker.
To increase, press []. To decrease, press [].
• The number of steps indicates the volume level.
1 Press
[DIGITAL SP-PHONE]
.
• The indicator lights and “SP-phone”
is displayed.
2 Dial a phone number.
• The dialed number is displayed.
• After a few seconds, the display will
show the length of the call.
• If you misdial, press [DIGITAL
SP-PHONE] and start again from
step 1.
3 When the other party answers, talk
into the MIC (microphone).
4 To hang up, press
[DIGITAL
SP-PHONE]
.
• The indicator goes out.
Hands-free Digital Duplex Speakerphone
For best performance, please note the following:
•Talk alternately with the caller in a quiet room.
• If you or the other party has hearing difficulty, press []
to decrease the
speaker volume.
•You can switch to the handset by lifting it up. To switch back to the
speakerphone, press
[DIGITAL SP-PHONE].
Base Unit
MIC
[REDIAL/PAUSE]
[HOLD]
[DIGITAL SP-PHONE]
and Indicator
[EXIT]
[CLEAR]
[ ], [ ]
Loud
Low High
Ex. Handset volume: High