47
Voice Mail Service
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Listening to Voice Mail Messages
The unit will let you know that someone has left voice mail for you in three ways;
(a) VM indicator will flash on the base unit,
(b) “Voice mail” will be displayed on the cordless handset, and
(c) “
” will flash on the cordless handset.
To listen to your voice mail message(s), follow the steps below.
• If “Store VM access#” is displayed and 3 beeps sound, store the number (p. 45).
• After listening to your message(s), “
” stops flashing but remains on the
cordless handset display.
• If the base unit and cordless handset still indicate you have new messages even
after you have listen to them, turn them off as follows.
—for the base unit: Press [FUNCTION/EDIT], then press and hold [CLEAR] until
the unit beeps.
—for the cordless handset: Press [CONF/FUNCTION], then press and hold
[HOLD/CLEAR] until the unit beeps.
“Voice mail” will disappear, “
” on the cordless handset stops flashing
but remains and the VM indicator will turn off.
• If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, the base unit and cordless handset may not indicate you
have new messages.
• If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
1 Press [VM].
• The base unit connects to the telephone line and dials the access number
(p. 45).
•To switch from the speakerphone to the handset, lift it off the cradle.
2 Follow the pre-recorded instructions.
3 When finished, place the handset on the cradle or if using the
speakerphone press [DIGITAL SP-PHONE].
1 Press the soft key ( ), then press [] or
[].
• The cordless handset connects to the telephone
line and dials the access number (p. 45).
2 Follow the pre-recorded instructions.
3 When finished, press [OFF].
Base Unit
Handset
MAIL
Base Unit
Handset
MAIL
Voice mail
MAIL
MAIL
MAIL