Filter
Top Products
51
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
You cannot program items
such as the dialing mode.
Previously programmed
information is erased.
The RECHARGE indicator
flashes or the unit beeps
intermittently.
You charged the battery
fully, but the RECHARGE
indicator flashes.
The IN USE/CHARGE/HOLD
indicator light does not go
out after the battery has
been charged.
If you cannot solve your
problem
Remedy
•Programming is not possible while the
unit is in the talk or intercom mode, or
while the answering system is in use.
•Do not pause for over 60 seconds while
programming.
•Move closer to the base unit.
•If a power failure occurs, programmed
information may be erased. Reprogram if
necessary.
•Charge the battery fully (p. 10).
•Clean the charge contacts and charge
again (p. 11).
•Install a new battery (p. 45).
•This is normal.
•Call our customer call center at
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY