Filter
Top Products
16
To check the recorded greeting message
Press (GREETING).
To erase the recorded greeting message
Press (GREETING) \ Press (ERASE) while the message is being played.
•The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message (p. 15), one of two messages will
be played when a call is received, depending on the caller’s recording
time (p. 19).
To check the pre-recorded greeting, press (GREETING).
•A pre-recorded greeting will be played as follows:
■ When the recording time is set to “1 minute”, “2 minutes” or “3 minutes”:
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
■ When the recording time is set to “Greeting only”:
“Hello, we are not available now. Please call again. Thank you for your call.”
Flash Memory Message Backup
Messages are stored on a “flash memory” IC chip and will not be
affected by power failures. All messages are saved until you erase
them.
Preparing the Answering System