Filter
Top Products
13
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Your phone comes from the factory set to “A”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (PROGRAM).
•The TALK/MUTE indicator flashes.
2
Press
(FLASH/CALL!WAIT/PLAYBACK).
•“P” is displayed on the base unit.
3
Press (3).
•The current setting is displayed on the
base unit.
4
To select “A”, press (1).
OR
To select “B”, press (2).
•The setting is displayed on the base unit.
5
Press (PROGRAM).
•A beep sounds.