Filter
Top Products
17
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Programming Summary for Answering System
You can program the following functions using the handset near the
base unit. See the corresponding pages for function details.
Make sure the unit is not being used and the handset is lifted off the
base unit.
•You can exit the programming mode any time by pressing (OFF).
•If you do not press any buttons for 60 seconds, the unit will exit the programming
mode.
Press (PROGRAM).
Press (FLASH/CALL!WAIT/PLAYBACK).
To adjust the day and time, press (0). (page 18)
To set the remote code, press (1). (page 35)
To select the number of rings, press (2). (page 20)
To select the line mode, press (3). (page 13)
To select the caller’s recording time, press (5). (page 19)
•The base unit display shows numbers or characters related to the adjustment
or settings.
Press (PROGRAM).
•A beep sounds from the base unit.
•If an alarm tone sounds, move closer to the
base unit and try again.