Filter
Top Products
49
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
The answering system is on,
but incoming messages are
not recorded.
You cannot listen to the
recorded messages.
“” is displayed and the
ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
You cannot operate the
answering system with the
base unit.
You cannot operate the
answering system from a
touch tone phone.
You cannot operate the
answering system with the
handset.
FULL
Remedy
•The recording time is set to “Greeting
only”. Select “1 minute”, “2 minutes” or
“3 minutes” (p. 19).
•Memory is full. Erase some, or all, of
the messages (p. 32).
•Make sure that the unit is not being
used.
•Memory is full. Erase some, or all, of
the messages (p. 32).
•The handset user is operating the
answering system, or is engaged in an
outside call. Wait until the
IN USE/CHARGE/HOLD indicator light
goes out.
•Make sure you enter the correct
remote code.
•The answering system may not
respond if the tones are too short to
activate the unit. Press each button
firmly.
•The answering system is off. Turn it
on (p. 39).
•Someone is operating the answering
system.
•You are too far from the base unit.
Move closer to the base unit.
•The unit is recording a message.
To answer the call, press or .
Answering System