Filter
Top Products
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (PROGRAM).
•The TALK/MUTE indicator flashes.
2
Press (FLASH/CALL!WAIT/PLAYBACK).
•“P” is displayed on the base unit.
3
Press (5).
•The current setting is displayed on
the base unit.
1: 1 minute
2: 2 minutes
3: 3 minutes
Blank: Greeting only
4
Press (1), (2), (3) or (0) to select the
recording time.
•The setting is displayed on the base
unit.
1: 1 minute
2: 2 minutes
3: 3 minutes
0: Greeting only
5
Press (PROGRAM).
•A beep sounds from the base unit.
•You can exit the programming mode any time by pressing (OFF)
.
19
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Caller’s Recording Time
You can select “1 minute”, “2 minutes”, “3 minutes” or “Greeting only” for
the caller’s recording time. Your phone comes from the factory set to
“3 minutes”.
If you select “Greeting only”, the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming
messages.
(PROGRAM)
(OFF)
(FLASH/CALL!WAIT/PLAYBACK)
TALK/MUTE
Indicator